This complex purification procedure is resulting in high quality laboratory water, free from ions, organics, particles and bacteria. Due to the fact that BioMajesty® is equipped with a degasser, the system water which is used for laboratory testing is free from gases too.
The O maxi is recommended for daily Di water consumption over 50 liters and especially adapted for BioMajesty® 6010/C. In addition, the O maxi is equipped with a new RO membrane reducing water consumption.

 

Technical specification of O maxi
Power tension230 volts ~ / 50 Hz.
Production flow
at 25°C (77°F)
55 liters / hour
Production flow
at 10°C (50°F)
40 liters / hour
Resins typemix-bed ions exchange resins 
Resins volume11 liters
Maximum supply water temperature38°C (100°F)
Maximum hardness without protection40 °f (French degree) of TH (1 °f = 10 mg/L CaCO3 = 4 mg/L Ca2+ = 2.4 mg/L Mg2+)
Admissible pH3-11
Mini / maxi supply pressure2 / 5 bars (29 / 87 PSI)
Dimensions (l × h × w)55 x 45 x 73 cm
Indicative weight58 kg
Accessories provided- 1 pressurized storage tank of 75 liters gross
- 1 calibrated conductimeter «HANNA»
- 1 bottle containing 11 L of mixbed resins
- 2 filters spanners
- 1 Phillips screwdriver
- Fuses
- 1 logbook (only for France)
- 1 technical manual
- Tubes and fittings for installation