This complex purification procedure is resulting in high quality laboratory water, free from ions, organics, particles and bacteria. Due to the fact that BioMajesty® is equipped with a degasser, the system water which is used for laboratory testing is free from gases too.
The O maxi is recommended for daily Di water consumption over 50 liters and especially adapted for BioMajesty® 6010/C. In addition, the O maxi is equipped with a new RO membrane reducing water consumption.
Technical specification of O maxi | |
---|---|
Power tension | 230 volts ~ / 50 Hz. |
Production flow at 25°C (77°F) | 55 liters / hour |
Production flow at 10°C (50°F) | 40 liters / hour |
Resins type | mix-bed ions exchange resins |
Resins volume | 11 liters |
Maximum supply water temperature | 38°C (100°F) |
Maximum hardness without protection | 40 °f (French degree) of TH (1 °f = 10 mg/L CaCO3 = 4 mg/L Ca2+ = 2.4 mg/L Mg2+) |
Admissible pH | 3-11 |
Mini / maxi supply pressure | 2 / 5 bars (29 / 87 PSI) |
Dimensions (l × h × w) | 55 x 45 x 73 cm |
Indicative weight | 58 kg |
Accessories provided | - 1 pressurized storage tank of 75 liters gross - 1 calibrated conductimeter «HANNA» - 1 bottle containing 11 L of mixbed resins - 2 filters spanners - 1 Phillips screwdriver - Fuses - 1 logbook (only for France) - 1 technical manual - Tubes and fittings for installation |